Panasonic BDP-140 User Manual

En

• Make the settings in the 

Setup Navigator menu 

according to the type of cable connected (page 23).

• To output video signals from this player, connect 

using a video cable (not including when connected 
using an HDMI cable).

•

Connect the player’s video output directly to 
your TV.
This player supports the analog copy protection 
technology. Therefore, the picture may not be 
displayed properly if this player is connected to a TV 
via a DVD recorder/video deck or when playing the 
player’s output material that is recorded by a DVD 
recorder/video deck. Furthermore, the picture may 
not be displayed properly due to the copy protection 
when the player is connected to a TV with a built-in 
video deck. For details, contact the manufacturer of 
your TV.

• Video signals are output with a resolution of 480/576I 

or 480/576P when this player is connected using a 
video cable.

• Depending on the output video resolution setting, the 

picture may not be output.

• To switch the video from the AV receiver or amplifier, 

also connect the video output terminals.

The data downloaded with the BD-LIVE function and the 
data used with the BONUSVIEW function when playing 
BD-ROMs can be stored on a device connected to the 
USB port (USB memory).

The USB memory devices that can be connected to the 
player are as shown below.

• USB 2.0-compatible memory devices

• FAT16 or FAT32 file system, minimum 1 GB capacity 

(2 GB or more recommended)

• Devices formatted with a file system other than the 

above cannot be used. Such devices may however be 
usable if they are formatted from the player.

• USB memory devices may not be recognized if they 

contain multiple partitions.

• Some USB memory devices may not operate with this 

player.

• Operation of USB memory devices is not guaranteed.

TV

BDP-LX55’s rear panel

Direction of 
signal flow

White

Red

It is also possible to connect to 
an AV receiver or amplifier. 
Connect the audio signals using 
an optical digital audio cable or 
an audio cable (2 channels) (on 
the right column).

To video/audio input terminals

Vi

deo

/au
di

o 

c

a

bl

e (in

c

lud
e

d)

Yellow

BDP-LX55’s rear panel

To audio input terminals

AV receiver or

amplifier

Direction of signal flow

2-channel analog 
audio can also be 
connected.

To optical digital

audio input terminal

Optical digital audio
cable (commercially

available)

White

Red

Video/audio cable 
(included)

BDP-140_VXCN5_IBD_EN.book  Page 20  Wednesday, September 28, 2011  9:52 AM