Panasonic BDP-140 User Manual
07
44
En
Adjusting the video
1
Select and set Display Setting
Video Adjust
Next Screen.
Use
Use
/ to select, then press ENTER.
2
Select the item and change the setting.
Use
/ to select the item, then use / to change the
setting. Once the setting is completed, press
RETURN to close the settings screen.
List of BDP-LX55 setting items
List of BDP-440/BDP-140 setting items
Note
• For the BDP-LX55, the
Video Adjust settings do not
affect Blu-ray 3D pictures or the pictures of the
VIDEO OUTPUT terminals.
VIDEO OUTPUT terminals.
Setting the IP address
1
Select and set Network
IP setting Next
Screen.
Use
Use
/ to select, then press ENTER.
2
Set IP address.
Use
/// to set the IP address of the player or DNS
server, then press
ENTER.
•
Auto Set IP Address
On – The player’s IP address is obtained
automatically. Select this when using a broadband
router or broadband modem that has a DHCP
(Dynamic Host Configuration Protocol) server
function. This player’s IP address will automatically
be allocated from the DHCP server.
automatically. Select this when using a broadband
router or broadband modem that has a DHCP
(Dynamic Host Configuration Protocol) server
function. This player’s IP address will automatically
be allocated from the DHCP server.
Off – The player’s IP address must be set manually.
Use the number buttons (0 to 9) to input the IP
address, subnet mask and default gateway.
Use the number buttons (0 to 9) to input the IP
address, subnet mask and default gateway.
Note
• For information on the DHCP server function, refer to
the operating instructions for the network device.
• You may need to contact your Internet service
provider or network administrator when inputting the
IP address manually.
IP address manually.
Setting the proxy server
Only set the proxy server if so instructed by your Internet
service provider.
service provider.
1
Select and set Network
Proxy Server Next
Screen.
Use
Use
/ to select, then press ENTER.
2
Select and set Use or Not use at Proxy Server.
Use
/ to change, then press .
•
Use – Select this when using a proxy server.
•
Not use – Select this when not using a proxy server.
If you have selected
Use, proceed to step 3.
3
Select and set Server Select Method.
Use
/ to change, then press .
•
IP Address – Input the IP address.
•
Server Name – Input the server name.
Item
Description
Prog.Motion
Adjust according to the type of image
(moving or still image). This is effective
mainly when outputting video materials
as progressive images.
(moving or still image). This is effective
mainly when outputting video materials
as progressive images.
Pure Cinema
This setting optimizes the operation of
the progressive scanning circuit for
playing film materials.
the progressive scanning circuit for
playing film materials.
Black level
Adjusts the level of the black portions.
White level
Adjusts the level of the white portions.
Hue
Adjusts the balance between green and
red.
red.
Chroma Level
Adjusts the density of the colors.
Detail
Adjusts the picture’s contours.
YNR
Reduces noise in the luminance (Y)
signal.
signal.
CNR
Reduces noise in the chroma (C) signal.
MNR
Reduces the mosquito noise (distortion
along the contours of the picture
generated upon MPEG compression).
along the contours of the picture
generated upon MPEG compression).
BNR
Reduces the block noise (block-shaped
distortion generated upon MPEG
compression).
distortion generated upon MPEG
compression).
Item
Description
Brightness
Select this to adjust the TV screen’s
brightness.
brightness.
Contrast
Select this to adjust the TV screen’s
contrast.
contrast.
Hue
Select this to adjust the color (green and
red) balance of the TV screen.
red) balance of the TV screen.
Saturation
Select this to adjust the TV screen’s
saturation.
saturation.
07_advanced_settings.fm 44 ページ ２０１１年１０月１３日 木曜日 午後４時２１分