Panasonic SC-BTT350 User Manual

VQT2W23

A Speaker cable sticker (supplied)
B Connector

Be sure to match the number on each sticker with the 
connector colour.

≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before 

≥ To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.

[BTT755]

∫ Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that 

may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.

A String (not supplied)

Thread from the wall to the speaker and tie tightly.

B Rear of the speaker
C Screw eye (not supplied)
D Wall
E Approx.150 mm

Preparing cables and making connection

1 FRONT (L)

WHITE

2 FRONT (R)

RED

3 SURROUND (L)

BLUE

4 SURROUND (R)

GREY

5 CENTRE

GREEN

6 SUBWOOFER

PURPLE

FRONT

Lch









Use of the speaker cable stickers is convenient 
when making cable connections.

e.g. Front speaker (L)

Push!

r: White
s: Blue line

Connecting the speaker cables. Insert the wire fully, 
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BTT350]











SCBTT755_350EBGN_VQT2W23.book  13 ページ  ２０１０年７月８日　木曜日　午後６時５３分