Panasonic SC-BTT350 User Manual

VQT2W23

Choose whether to show status messages automatically.

Choose the language for menus and on-screen messages.

This is to prevent burn-in on the screen.
When this is set to “On”:
If there is no operation for 5 minutes or more, the displayed 
screen switches to the other states automatically.
≥ While playing and pausing, etc., this function is not available.
≥ While playing music (CD-DA or MP3), after about 5 minutes 

DIRECT NAVIGATOR screen switches to a blank screen 
with “Screen Saver” message.

Changes the brightness of the unit’s display.
≥ If “Automatic” is selected, the display is dimmed but 

brightens when you perform some operations.

Information about the software used by this unit is displayed.

Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when “Side by 

side” is selected.

Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9 
ratio image:

Press [OK] to show the following settings:

HDMI Video Format
The items supported by the connected devices are 
indicated on the screen as “¢”. When any item without “¢” 
is selected, the images may be distorted.
≥ If “Automatic” is selected, automatically selects the 

output resolution best suited to the connected television.

≥ To enjoy high-definition video up-converted to 1080p, 

you need to connect the unit directly to 1080p 
compatible HDTV (High Definition Television). If this unit 

is connected to an HDTV through other equipment, it 
must also be 1080p compatible.

24p Output
When this unit is connected to a TV supporting 1080/24p 
output using an HDMI cable, movies and other material 
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then set “24p” 

in “Picture” (> 37) to “On”

≥ When BD-Video images other than 24p are played, 

images are output at 60p.

HDMI Colour Mode
This setting is for selecting colour-space conversion of the 
image signal when the unit is connected using an HDMI 
cable.

HDMI Audio Output
This setting selects whether or not to output audio from 
HDMI.
≥ Audio will be output through the system's speakers when 

“Off” is selected.

VIERA Link
Set to use “HDAVI Control” function when connected with 
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI 

Control”.

Deep Colour Output
This setting is for selecting whether to use Deep Colour 
Output when a television that supports Deep Colour is 
connected.

Contents Type Flag
Depending on the playback content, the TV will output 
adjusting to the optimal method when a TV that supports 
this function is connected.

Power Off Link
Select the desired power off link setting of this unit for 
VIERA Link operation (> 34). (This works depending on 
the settings of the connected VIERA Link “HDAVI Control” 
compatible equipment.)
Video/Audio:
When the TV is turned off, this unit will turn off 
automatically.
Video:
When the TV is turned off, this unit will turn off except 
during the following conditions:
jCD or MP3 audio playback
jiPod/iPhone mode
jRadio mode
j“AUX”, “ARC” or “D-IN” (DIGITAL IN) mode 

(non-selected TV AUDIO setting for VIERA Link)

j“D-IN” (DIGITAL IN) mode (non-selected CABLE/

SATELLITE AUDIO setting for VIERA Link)

Select the TV audio input to work with the VIERA Link 
operations.

Display

TV / Device Connection

The sides are cut off so 
the picture fills the screen. 
When playing BD-Video, 
video is output as “4:3 
Letterbox”.

Black bands appear at the 
top and bottom of the 
picture.

When connected to a 16:9 widescreen television and playing 
4:3 ratio image:

Video is displayed as a 4:3 ratio image in the 
centre of the screen.

SCBTT755_350EBGN_VQT2W23.book  41 ページ  ２０１０年７月８日　木曜日　午後６時５３分