Panasonic DMP-BDT460 User Manual

SQT0080

¾

Depending on the playback content, the TV will 
output adjusting to the optimal method when a 
TV that supports this function is connected.

¾

HDMI(SUB) Output Mode [BDT460]

Set to output the video from the HDMI AV OUT 
SUB terminal or not.

*1

A progressive image recorded at a rate of 24 frames per 
second (motion-picture film). Many BD-Video movie 
contents are recorded in 24 frames/second in accordance 
with the film materials.

*2

A high resolution image/display technology of 
approximately 4000 (width) 

k

 2000 (height) pixels.

∫ Dynamic Range Compression
You can listen at low volumes but still hear 
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby 
TrueHD only)
≥ “Auto” is effective only when playing Dolby 

TrueHD.

∫ Digital Audio Output
Press [OK] to show the following settings:

¾

¾

Select the audio signal to output.
≥ Select “PCM”, when the connected 

equipment cannot decode the respective 
audio format. This unit decodes the audio 
format and transmits to the connected 
equipment.

≥ If you do not make proper settings the audio 

may be static or noisy.

¾

Select whether or not to mix the primary and 
secondary audio (including the button click 
sound).
If “Off” is selected, the unit outputs the primary 
audio only.

¾

This setting selects whether or not to output 
audio from HDMI.
≥ Select “Off” when the TV is connected to this 

unit via HDMI AV OUT terminal, and this unit 
is also connected to other devices, such as 
an amplifier/receiver via an OPTICAL 
terminal.

∫ PCM Down Conversion
Select how to output audio with a sampling 
frequency of 96 kHz for the PCM output from the 
OPTICAL.
≥ If “On” is selected, the signals that are 

converted to 48 kHz are output.

≥ If “Off” is selected, and the connected 

equipment does not support 96 kHz, the sound 
will not be output normally.

≥ Signals are converted to 48 kHz despite the 

settings in the following cases:
– when the signals have a sampling frequency 

of 192 kHz

– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to 

“On”

∫ Downmix
Select the downmix system of multi-channel to 
2-channel sound.
≥ Select “Surround encoded”, when the 

connected equipment supports the virtual 
surround function.

≥ The downmix effect is not available when 

“Digital Audio Output” is set to “Bitstream”.

≥ The audio will be output in “Stereo” in the 

following cases:
– AVCHD playback
– Playback of secondary audio (including the 

button click sound).

∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
≥ This function works when the following 

conditions are met:
– Audio is output from the HDMI AV OUT 

terminal.

– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “PCM” when 

audio other than PCM is output.

DMP-BDT460_360_SQT0080_eng.book  25 ページ  ２０１３年１２月１９日　木曜日　午後３時０分