Panasonic DMP-BDT460 User Manual

Page of 40
32
SQT0080
A black band is displayed around the edge of 
the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly. 
(> 28)
¾
Adjust the aspect setting on the TV.
Cannot switch audio.
¾
The audio cannot switch, if “Digital Audio 
Output” is set to “Bitstream”. Set “Digital 
Audio Output” to “PCM”. (> 25)
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio 
Output” settings. (> 9, 25)
¾ [BDT460] : When connecting this unit to a TV 
via an HDMI AV OUT MAIN and to an 
amplifier/receiver via an HDMI AV OUT SUB, 
set “HDMI(SUB) Output Mode” to “V.OFF”. 
(> 10)
¾
To output audio from a device connected with 
an HDMI cable, set “HDMI Audio Output” to 
“On” in the Setup menu. (> 25)
There is no sound coming out from the TV. 
[BDT460]
¾
Audio may not output from the TV when the 
amplifier/receiver is connected to the HDMI 
AV OUT SUB, and “HDMI(SUB) Output 
Mode” (> 25) is set to “V.OFF”. In such a 
case, output audio from the amplifier/receiver. 
To output audio from the TV, set the 
“HDMI(SUB) Output Mode” to “Normal”.
Disc cannot be played.
¾
The disc is dirty. (> 5)
¾
The disc is not finalized. (> 7)
¾
Confirm the “Mixed Data Disc Option” is set 
properly. (> 28)
Still pictures (JPEG) do not play back 
normally.
¾
The images that were edited on the PC, such 
as Progressive JPEG, etc., may not be played 
back.
I can’t play back BD-Live.
¾
Confirm that this unit is connected to the 
broadband Internet. (> 11)
¾
Connect this unit to the network by a wired 
connection.
¾
Confirm the “BD-Live Internet Access” 
settings. (> 27)
¾
Confirm a USB device is connected to the 
USB port. (> 14)
I can’t connect to the network.
¾
Confirm the network connection and settings. 
(> 11, 12, 26)
¾
There may be interference that prevents the 
unit from detecting your home network. Place 
the unit and the wireless router closer to each 
other. This unit may be able to detect your 
network name (> 13, “SSID”).
¾
Check the owner’s manuals for each device 
and connect accordingly.
When using wireless LAN connection, video 
from the DLNA Certified media server is not 
played back or video frames are dropped 
during playback.
¾
Higher transfer rate router such as 802.11n 
(2.4 GHz or 5 GHz) wireless router may solve 
the problem. If you use 802.11n (2.4 GHz or 
5 GHz) wireless router, it is necessary to set 
the encryption type to “AES”.
Simultaneous use with a microwave, cordless 
telephone etc. at 2.4 GHz may result in 
connection interruptions or other problems.
¾
On the “Wireless Settings” screen (> 26), the 
continuous lighting of at least 4 “Reception” 
indicators is the target for a stable connection. 
If 3 or fewer indicators are lit or the 
connection is being interrupted, change the 
position or angle of your wireless router and 
see if the connection state improves. If there 
is no improvement, connect to a wired 
network and perform the “Easy Network 
Setting” (> 12) again.
Audio
Playback
Network
DMP-BDT460_360_SQT0080_eng.book  32 ページ  2013年12月19日 木曜日 午後3時0分