Panasonic DMP-BD45 User Manual

VQT2H86

Select the type of picture shown when you pause playback.

The chapters segment in playlists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the 

chapters segment in playlists.

Select lighter or darker for adjusting the black level control to 
the desired setting for picture enhancement.

You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.

>

Press [OK] to show the following settings.

Select how to output audio with a sampling frequency of 
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥ If “On” is selected, the signals that are converted to 48 kHz 

are output.

≥ If “Off” is selected, and the connected equipment does not 

support 96 kHz, the sound will not be output normally.

≥ Signals are converted to 48 kHz despite the settings across 

in the following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”

Select the downmix system of multi-channel to 2 channel 
sound.
≥ Select “Surround encoded”, when the connected equipment 

supports the virtual surround function.

≥ There is no effect on “Bitstream” via HDMI AV OUT and 

DIGITAL AUDIO OUT.

≥ The audio will be output in “Stereo” in the following cases.

– AVCHD playback
– Playback of secondary audio (including the button click 

sound).

[BD65]

[BD655]

Surround sound with 6.1ch or less is automatically expanded 
and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the original number 

of channels. (Note that in the case of 6.1ch audio, playback 
will be at 5.1ch.)

Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby 

TrueHD or LPCM.

Choose whether to show status messages automatically.

Choose the language for these menus and on-screen 
messages.

This is to prevent burn-in on the screen.
≥ When this is set to “On”:

If there is no operation for 10 minutes or more, Direct 
Navigator screen switches to FUNCTIONS screen 
automatically.

≥ While playing and pausing, etc., this function is not 

available.

≥ As for Music [CD-DA] or MP3, regardless of the setting, if 

there is no operation for a while, Direct Navigator screen 
switches to the other states automatically.

Changes the brightness of the unit’s display.
≥ If “Auto” is selected the display is dimmed during playback 

and bright except during playback.

Information about the software used by this unit is displayed. 

Video

Auto

Automatically selects the type of picture shown.

Field

Select if jittering occurs when “Auto” is selected.

Frame

Select if small text or fine patterns cannot be seen 
clearly when “Auto” is selected.

Audio

Select the audio signal to output.
≥ Select “PCM”, when the connected equipment cannot 

decode the respective audio format.

≥ Not making the proper settings may result in noise.

Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound).

 

(> 18)

≥ If “Off” is selected, the unit outputs the primary audio only.

Display

DMP-BD65_45_VQT2H86_eng.book  26 ページ  ２００９年１２月９日　水曜日　午後８時５１分