Panasonic DMP-BD45 User Manual

VQT2H86

STEP 1 : Connecting to a TV

≥ Do not place the unit on amplifiers/receivers or equipment 

that may become hot. The heat can damage the unit.

≥ Before making any connections we suggest you temporarily 

disconnect all the units from AC power.

≥ Do not connect video signals through a video recorder. Due 

to copy guard protection the picture may not be displayed 
properly.

≥ Refer to page 33, about recommended settings for each 

piece of connected equipment.

≥ [BD65]

[BD45]

Please use High Speed HDMI Cables that 

have the HDMI logo (as shown on the cover). It is 
recommended that you use Panasonic’s HDMI cable. When 
outputting 1080p signal, please use HDMI cables 5.0 
meters (16.4 ft) or less.
Recommended part number: 
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), 
RP-CDHS50 (5.0 m/16.4 ft.), etc.

≥ [BD655]

Do not use any other HDMI cables except the 

supplied one.

∫ Via an HDMI AV OUT terminal

∫

[BD65]

[BD655]

∫ Via a VIDEO OUT terminal

≥ The HDMI connection supports 

VIERA Link “HDAVI Control” (> 21) 
when used with a compatible 
Panasonic TV. 

≥ Set “HDMI Video Mode” 

[BD65] [BD655]

and “HDMI Audio 

Output” to “On” (> 27).

≥ Connect terminals of the same color.
≥ Set “Component Video Resolution” to 

“480p”, “720p” or “1080i” (> 27). 

≥ Set “HDMI Video Mode” to “Off” 

(> 27).

≥ Connect terminals of the same color.

HDMI IN

HDMI cable
(Only included 
in DMP-BD655)

COMPONENT

VIDEO IN

AUDIO IN

R         L

Component 
Video cable

Audio/Video 
cable
(included)

AUDIO IN

R         L VIDEO IN

Audio/Video 
cable (included)

VQT2H86~Body_eng.fm  8 ページ  ２００９年１２月１１日　金曜日　午前１０時３１分