Panasonic DMP-BD70V User Manual

RQT9412

The following services can be used when this unit is connected to the 
Internet via a broadband connection.
≥Firmware can be updated

 

(B right)

≥You can enjoy the BD-Live (> 23)
≥You can enjoy the VIERA CAST (> 27)

≥Use shielded LAN cables when connecting to peripheral devices.
≥With installation where your broadband modem is connected 

directly to your PC, a router must be installed.

≥Use a router that supports 10BASE-T/100BASE-TX.
≥In case all available connection on your router is being used, a hub 

or switch can be installed to provide additional connections.

≥When operating the VIERA CAST, use high-speed Internet service 

no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps for 
HD (High Definition) picture quality by your local broadband 
company.
– If using slow Internet connection, the video may not be displayed 

correctly.

≥After physically connecting this unit to your broadband connection, 

some configuration is required. (> 17)

≥Inserting any cable other than a LAN cable in the LAN terminal can 

damage the unit.

LAN

10BASE-T/

100BASE-TX

AV OUT

VIDEO OUT

COMPONENT VIDEO O

Y

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

AC IN

Straight LAN cable (not included)

Occasionally, Panasonic releases firmware updates for this BD 
Player. Firmware is embedded software that controls this unit’s 
microprocessor. These updates may add or improve a feature of this 
unit. Firmware updates may also be released to correct operating 
irregularities that are discovered with certain movies. These updates 
are available at no charge. 

This unit is capable of auto firmware check if it is connected to the 
Internet via a broadband connection.
When latest firmware version is available, the following screen is 
displayed.
Select “Yes” or “No”.

≥If “Yes” is selected, then follow the on-screen instructions.
≥If “No” is selected, then manually update the firmware later. 

(B below)

After the latest firmware is downloaded, the system will be restarted 
and the firmware will be updated.
When the system is restarted, the screen 
display disappears and “START” is displayed 
on the unit’s display.
After the firmware is updated and the system is restarted, the 
following screen indicates that the firmware update has been 
completed.

≥During the update process, no other operations can be performed. 

Serious damage may occur if you turn the power off and/or press 
any buttons.

≥Downloading will require several minutes. It may take longer or the 

Internet may not be connected depending on the connection 
environment. It is required that you use a broadband connection.

≥When the unit is connected to the Internet, communication charges 

may be generated.

≥If you do not want to check for the latest firmware version when the 

unit is turned on, set “Automatic Update Check” to “Off”. (> 36)

If the firmware update is not carried out when the unit is turned on, a 
message is displayed when displaying the FUNCTIONS menu.

1) Press [SETUP].
2) Press [3, 4] to select “Others” and press [OK].
3) Press [3, 4] to select “Firmware Update” and press [OK].
4) Press [3, 4] to select “Update Now” and press [OK].
5) Press [2, 1] to select “Yes” and press [OK].

If downloading on this unit fails or this unit is not connected to 
the Internet, then you can download the latest firmware from 
the following website and burn it to a CD-R to update the 
firmware.
http://panasonic.net/support/
(This site is in English only.)

The latest firmware is available.
Please update firmware in Setup.

DMP-BD70V-RQT9412_ENG.book  16 ページ  ２００９年２月２７日　金曜日　午後７時２３分