Panasonic DMP-BD80GN User Manual

RQT9407

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in 
BD-Video.

To enjoy above high bit rate audio, the following conditions are necessary. (Part shown in the shaded area of table given below)
NECESSARY CONNECTIONS
≥HDMI AV OUT terminal: (

9)

≥7.1ch AUDIO OUT terminal [BD80]: (

9)/ 5.1ch AUDIO OUT terminal [BD80]: (

10)

NECESSARY SETTINGS
≥Set “BD-Video Secondary Audio” to “Off”. (

30)

≥HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM”. (

30)

≥7.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “7.1ch”. (

31)

≥5.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “2ch (Downmix) + 5.1ch”. (

31)

Connect an amplifier/receiver (

9, 10) and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”, “Dolby D/Dolby 

D +/Dolby TrueHD” or “DTS/DTS-HD”).
≥The number of channels listed is the maximum possible number of output channels.

≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.

*1 When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surround 

bitstream or down-mixed 2ch PCM (e.g., TV).

*2 [BD-V]: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary 

Audio” was set to “Off”.

*3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*4 [BD-V]: When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1ch 

depending on the DTS, Inc. specifications.

*5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio 

decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.

*6 [BD-V]: When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital 

Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.

NECESSARY SETTINGS
≥HDMI AV OUT/DIGITAL AUDIO OUT terminal: “Digital Audio Output” (

30)

≥[BD80] 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminal: “Digital Audio Output” and “Analog Audio Output” (

30, 31)

[Note]
≥When setting “BD-Video Secondary Audio” to “Off”, the clicking sound on the menu and audio with secondary video in picture-in-picture mode 

(

19) cannot be output.

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in 
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
≥Connect to a TV supporting 1080/24p input via an HDMI cable.

NECESSARY SETTINGS
≥“24p Output”: “On” (

31)

(Coaxial [BD80]/Optical)

7.1ch AUDIO OUT [BD80]

[BD80]

Dolby Digital/

Dolby Digital 

EX*

6

Dolby 

Digital/

Dolby Digital 

EX

5.1ch PCM

Dolby Digital/

Dolby Digital 

EX*

6

Down-mixed 

2ch PCM

5.1ch

5.1ch

Dolby Digital

Dolby Digital 

Plus

5.1ch 

PCM*

2

7.1ch PCM Dolby Digital

5.1ch*

2

7.1ch

Dolby 

TrueHD

DTS Digital 

Surround/

DTS-ES*

6

DTS Digital 

Surround/

DTS-ES

[DVD-V]: 5.1ch PCM

DTS Digital 

Surround/

DTS-ES*

6

[DVD-V]: 5.1ch

[BD-V]: 7.1ch PCM*

4

[BD-V]: 7.1ch*

4

DTS Digital 

Surround

DTS-HD 

High 

Resolution 

Audio

7.1ch PCM*

4

DTS Digital 

Surround

7.1ch*

4

DTS-HD 

Master 

Audio

Down-mixed 

5.1ch PCM 7.1ch PCM

Down-mixed 

5.1ch 

PCM*

2

7.1ch PCM Down-mixed 

2ch PCM

Down-mixed 

5.1ch*

2

7.1ch

RQT9407~Body_mst.fm  20 ページ  ２００９年２月２３日　月曜日　午後８時９分