Sharp BD-AMS10U User Manual

In this player, the software version can be updated 

using either one of the following methods.

•  Auto Update from Network

•  Manual Update from Network

•  Manual Update from USB memory device

This function allows you to perform the update by 

accessing an Internet connection automatically to 

check if there is a new firmware version every time 

the player is turned on.

When using this function, it is required to perform 

the following settings in advance.

•  Make sure that the LAN cable or the wireless LAN 

adapter is connected to this player and make sure that 

the wireless router/access point is connected to the 

Internet if using the wireless LAN adapter. (See pages 

•  Make sure to perform the communication settings. (See 

•  It may take time to access and download the update 

depending on the Internet connection and other factors.

•  Do not remove the LAN cable or the wireless LAN 

adapter or unplug the AC cord while downloading or 

updating software.

Press c/d to select “Settings”, then press b or 

ENTER.

Press c/d to select “Software Update 

Settings”, then press b or ENTER.

Press a/b to select “Auto Update Setting”, 

then press d or ENTER.

Press a/b to select “Yes”, then press ENTER.

•  After this, an Internet connection will be made 

automatically every time this player is turned on.

When this player is turned on, the Internet 

connection starts automatically.

•  “

Accessing...” blinks on the screen.

•  The current version of this unit software and the 

latest version of the update file on the network are 

displayed when latest version of firmware has been 

found. 

To update this player software with update file, 

select “Yes”, and go to step 2.

Latest version of firmware has been found.

Firmware update is available.

Proceed with update?

If “Yes” will be selected, version update will start.

Current Version : 
Latest Version  : 

xxxxxxxxxx

yyyyyyyyyy

Yes

No

•  If the latest firmware version has been already 

updated, nothing is displayed on the screen.

Press 

ENTER to start updating.

Downloading latest firmware…
Version :

  yyyyyyyyyy

30%

When the software is successfully updated, a 

screen is displayed indicating that the update 

process is completed.

•  If the update has failed, an error message appears.

Retry the update after checking if the broadband 

Internet connection (pages 19–20) and communication 

settings (pages 50–53) are performed properly.

Press 

POWER to turn off the player before using 

again.