Panasonic DMP-BDT330 User Manual
38
VQT4V26
Messages
Check the following when messages or service
numbers are displayed on the screen or unit’s
display.
numbers are displayed on the screen or unit’s
display.
Cannot play.
¾ You inserted an incompatible disc (Discs
¾ You inserted an incompatible disc (Discs
recorded in PAL video, etc.).
Cannot display on this unit.
¾ You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not
¾ You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not
displayed and re-insert the card.
No disc inserted.
¾ The disc may be upside down.
¾ The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾ The “IP Address” in “IP Address/DNS
¾ The “IP Address” in “IP Address/DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
¾ Set a stronger network security level referring
is weak. It is recommended to change to a
stronger security setting.
¾ Set a stronger network security level referring
to the wireless router operating instructions.
NET
¾ While connecting to a network.
¾ While connecting to a network.
No PLAY
¾ There is a viewing restriction on a BD-Video
¾ There is a viewing restriction on a BD-Video
or DVD-Video. (
> 33)
¾ The media is dirty or badly scratched. The
unit cannot play.
REMOVE
¾ The USB device is drawing too much power.
¾ The USB device is drawing too much power.
Remove the USB device.
SET
(“ ” stands for a number.)
¾ The remote control and this unit are using
different codes. Change the code on the
remote control.
remote control.
Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.
indicated number button at
the same time for more than
5 seconds.
U59
¾ Temperature of this unit is hot and the unit
¾ Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Select a position with good ventilation when
installing the unit.
Wait for about 30 minutes.
Select a position with good ventilation when
installing the unit.
H
or F
(“
” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting
¾ Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
displayed, do the following.
1 Disconnect the plug from the AC outlet, wait a
few seconds, then reconnect it.
2 Press [
Í/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
On the TV
On the unit’s display
DMP-BDT330_230_VQT4V26_eng.book 38 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分