ONKYO BD-SP808 User Manual
37
EN
SPECIAL SETTINGS
Adjusting the Picture
BD-V
DVD-V
AVCHD
You can adjust the picture quality and store the setting you have adjusted on memory 1-5.
1
During playback, press [MODE] repeatedly to select "HD Picture Control" or
"SD Picture Control", then press [ENTER].
“HD Picture Control”:
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480p, 720p and 1080i) and HDMI OUT jack.
“SD Picture Control”:
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480i), VIDEO OUTPUT (VIDEO) jack.
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480p, 720p and 1080i) and HDMI OUT jack.
“SD Picture Control”:
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480i), VIDEO OUTPUT (VIDEO) jack.
2
Use [
K / L] to select a memory from “Memory 1” to “Memory 5” to store your setting,
then press [ENTER].
Memory1
3
Use [
K / L] to select an item to be adjusted, then use [{ / B] or [ENTER] to adjust the setting.
2. Brightness
15. Progressive Mode
1. Contrast
0
Auto
+1
s
B
Item
Adjustment range
Description
Picture Control Setting
“HD Picture Control“ “SD Picture Control“
1. Contrast
-7 to +7 (0*)
Adjusts the difference between the
bright and dark parts of the picture.
bright and dark parts of the picture.
2. Brightness
0 to +15 (0*)
Adjusts the brightness of the picture.
3. Sharpness
-2 to +2 (0*)
Adjusts the sharpness of the picture.
4. Gamma Correction -2 to +2 (0*)
Adjusts the dark positions of the
picture.
picture.
5. ICR Red
0 to +7 (0*)
Adjusts the red color of the picture.
6. ICR Blue
0 to +7 (0*)
Adjusts the blue color of the picture.
7. ICR Green
0 to +7 (0*)
Adjusts the green color of the picture.
8. Color
-7 to +7 (0*)
Adjusts the color density of the
picture.
picture.
9. Hue
-7 to +7 (0*)
Adjusts the balance between the
green and red.
green and red.
10. Black Level
Adjusts the black level.
Off*, Middle, High
Off, On*
11. Noise Reduction
Off*, 1to 3
Reduces noise in the luminance signal
and chroma signal.
and chroma signal.
12. MPEG NR
Off*, 1to 3
Reduces block noise and mosquito
noise.
noise.
13. Edge Enhancer
Off*, Soft, Middle, Strong Emphasizes the edge of the picture.
14. Qdeo True Color
Off*, Low, Middle, High
Adjusts the smoothness of the
picture. It is available for 10 or 12 bit
display.
picture. It is available for 10 or 12 bit
display.
15. Progressive Mode Auto*, Video
Selects the setting of the progressive
scan.
scan.
* ) Default setting
*
*
1
) It may take several seconds to reflect the adjusted setting.
*
2
) For optimal video performance, THX recommends the following settings: “Black Level“ = “Off“.
Note
• The setting remains even you turn the unit into the standby mode except unplug the AC cord.
• ICR is the abbreviation of Intelligent Color Remapping.
• Qdeo True Color Processing (QTC) dynamically expands 8-bit video to use the full dynamic range offered by 10
• ICR is the abbreviation of Intelligent Color Remapping.
• Qdeo True Color Processing (QTC) dynamically expands 8-bit video to use the full dynamic range offered by 10
and 12 bit displays, eliminating contours while preserving detail.
• Qdeo True Color is adjustable and effective when this unit is connected with the display device which is
compatible with Deep Color.
• If you press [MODE] during playing back Netflix / CinemaNow / Blockbuster, picture control setting will not appear
on the TV screen, but the selected setting is available. Please adjust the setting when another mode, then play
back Netflix / CinemaNow / Blockbuster.
back Netflix / CinemaNow / Blockbuster.
*
1
*
1
*
2