ONKYO BD-SP308 User Manual
13
En
Connect the VIDEO OUTPUT (VIDEO) jack on the
player to the video in jack on the TV using a video cable.
Connect the left and right ANALOG AUDIO OUTPUT
jacks of the player to the audio left and right IN jacks on
the TV using the audio cables.
player to the video in jack on the TV using a video cable.
Connect the left and right ANALOG AUDIO OUTPUT
jacks of the player to the audio left and right IN jacks on
the TV using the audio cables.
Video/Audio Connection
The player provides several output resolutions for HDMI
OUT and VIDEO OUTPUT (COMPONENT) jacks. You
can change the resolution using “Setup” menu.
OUT and VIDEO OUTPUT (COMPONENT) jacks. You
can change the resolution using “Setup” menu.
Note
• If your TV does not accept the resolution you have set on the
player, you can set resolution to 480p as follows:
1. Press OPEN/CLOSE (
0) to open the disc tray.
2. Press
2 (STOP) for more than 5 seconds.
• Since several factors affect the resolution of video output, see
Video/Audio (Left/Right) Connection
L
VIDEO
R
this unit
Video cable
TV
Audio cable
Resolution Setting
1
Press
HOME (
k).
2
Use
e/r to select the “Setup” and press
ENTER (
j).
The “Setup” menu appears.
3
Use
q/w to select “DISPLAY” option then press r
to move to the second level.
4
Use
q/w to select the “Resolution” option then
press
ENTER (
j) to move to the third level.
5
Use
q/w to select the desired resolution then press
ENTER (
j) to confirm your selection.
You can select settings marked with “
” for a
component video connection. You can select settings
marked with “
marked with “
” for an HDMI connection.