ONKYO BD-SP308 User Manual

En

This player can be connected to a local area network 
(LAN) via the ETHERNET port on the rear panel.
By connecting the unit to a broadband home network, you 
have access to services such as BD-LIVE interactivity, 
Netflix and software updates.

Connect the player’s ETHERNET port to the correspond-
ing port on your Modem or Router using a commercially 
available LAN or Ethernet cable (CAT5 or better with 
RJ45 connector).

• When plugging or unplugging the LAN cable, hold the plug por-

tion of the cable. When unplugging, do not pull on the LAN 
cable but unplug while pressing down on the lock.

• Do not connect a modular phone cable to the ETHERNET port.
• Since there are various connection configurations, please follow 

the specifications of your telecommunication carrier or internet 
service provider.

If there is a DHCP server on the local area network (LAN) 
via wired connection, this player will automatically be 
allocated an IP address. After making the physical connec-
tion, a small number of home networks may require the 
player’s network setting to be adjusted. Adjust the “NET-
WORK” setting as follow.

■

Before setting the wired network, you need to connect the 
broadband internet to your home network.

Broadband 
service

LAN cable

this unit

PC

PC

Router/Modem

j).

q/w/e/r select the IP mode between 

“Dynamic” and “Static”.
Normally, select “Dynamic” to allocate an IP 
address automatically.

• If there is no DHCP server on the network and you want 

to set the IP address manually, select “Static” then set “IP 
Address”, “Subnet Mask”, “Gateway” and “DNS 

Server” using 

q/w/e/r and numerical buttons. If you 

make a mistake while entering a number, press CLEAR to 
clear the highlighted part.

j) to apply net-

work settings.
The player will ask you to test the network connec-
tion.

j) to complete