ONKYO BD-SP308 User Manual

En

When the resolution is set to 1080p, select “24 Hz” for 
smooth presentation of film material (1080p/24 Hz) with a 
HDMI-equipped display compatible with 1080p/24 Hz 
input.

• When you select “24 Hz”, you may experience some picture dis-

turbance when the video switches video and film material. In this 
case, select “60 Hz”.

• Even  when  “1080p Display Mode” is set to “24 Hz”, if your TV 

is not compatible with 1080p/24 Hz, the actual frame frequency 
of the video output will be 60 Hz to match the video source for-
mat.

Select the type of output from the HDMI OUT jack. For 
this setting, please refer to the manuals of your display 
device.

`

YCbCr:

Select when connecting to a HDMI display device.

`

RGB:

Select when connecting to a DVI display device.

With this setting you can adjust the picture blackness for 
the analog video outputs. It does not affect the component 
video output.

`

0 IRE:

Blacks are darker, and the entire picture becomes 
darker.

`

7.5 IRE:

Blacks are lighter, and the entire picture becomes 
lighter.

Select a language for the “Setup” menu and on-screen dis-
play.

Select the language you prefer for the audio track (disc 
audio), subtitles, and the disc menu.

`

Original:

Refers to the original language in which the disc was 
recorded.

`

Other:

Press ENTER (

j) to select another language. Use 

number buttons then press ENTER (

j) to enter the 

corresponding 4-digit number according to the lan-
guage code list (

`

Off (Disc Subtitle only):

Turn off Subtitle.

• Depending on the disc, your language setting may not work.

Each disc has a variety of audio output options. Set the 
player’s Audio options according to the type of audio sys-
tem you use.

• Since many factors affect the type of audio output, see “Audio 

Output Specifications” for details (

Select the output sound format when a device equipped 
with a HDMI or Digital Audio input jack is connected to 
the HDMI OUT or DIGITAL AUDIO OUTPUT jack on 
this player.

`

PCM Stereo:

Select if you connect this unit’s HDMI OUT or DIG-
ITAL AUDIO OUTPUT jack to a device with two-
channel digital stereo decoder.

`

PCM Multi-Ch (HDMI only):

Select if you connect this unit’s HDMI OUT jack to 
a device with multi-channel digital decoder.

`

DTS Re-Encode:

Select if you connect this unit’s HDMI OUT or DIG-
ITAL AUDIO OUTPUT jack to a device with DTS 
decoder.

`

Primary Pass-Thru:

Select if you connect this unit’s DIGITAL AUDIO 
OUTPUT and HDMI OUT jack to a device with 
LPCM, Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD, DTS and DTS-HD decoder.

• When  “HDMI” option is set to “PCM Multi-Ch”, the audio 

may output as PCM Stereo if the PCM Multi-Ch information is 
not detected from HDMI device with EDID.

• If  the  “HDMI” or “Digital Output” option is set to “DTS 

Re-Encode”, the DTS Re-encode audio is output for BD-ROM 
discs with secondary audio and the original audio is output for 
the other discs (like “Primary Pass-Thru”).

`

192 kHz:

Select this if your AV receiver is capable of handling 
192 kHz signals.

`

96 kHz:

Select this if your AV receiver is not capable of han-
dling 192 kHz signals.
When this choice is made, this unit automatically 
converts any 192 kHz signals to 96 kHz so your sys-
tem can decode them.

`

48 kHz:

Select this if your AV receiver is not capable of han-
dling 192 kHz and 96 kHz signal. When this choice 
is made, this unit automatically converts any 192 
kHz and 96 kHz signals to 48 kHz so your system 
can decode them.

Check the documentation for your AV receiver to verify its 
capabilities.