Panasonic DMW-MCTZ3 User Manual

17

VQT1F25

∫ Notes

≥

Check one more time that the O-ring is fitted evenly into the O-ring groove.

≥

Avoid opening or closing the Case where there is a lot of sand or dust and in humid 
or wet places.

≥

If there is a sudden change in temperature, condensation may appear inside the 
Case.

≥

If sunscreen or sun oil sticks to the Case, wash it off immediately with lukewarm 
water to prevent reduced waterproofness or discoloration.

∫ Attaching the weights
About using the weights

Attach the weights to adjust to the preferred buoyancy when using the marine case. 
Use them as necessary.

Refer to the following about buoyancy underwater.

1

If you use the digital camera and the marine case only:
They will float slowly in fresh water or seawater. (Plus buoyancy)

2

If you use the digital camera, the marine case and 1 weight:
They will float even more slowly in fresh water or seawater than 

1

. 

(Plus buoyancy)

3

If you use the digital camera, the marine case and 2 weights:
They will sink slowly in fresh water or seawater. (Minus buoyancy)

If you use 1 weight, align the protruding part of 
the weight with the tripod receptacle on the 
marine case and then use the supplied screw 
to attach it. If you use 2 weights, align the 
projecting part of the second weight with the 
indented part of the first weight so that the 
weights do not overlap and then attach them 
to the tripod receptacle.

∫ Note
≥

To prevent rusting, detach the weights after use, wipe off any salt and then store 
them.

DMW-MCTZ3.book  17 ページ  ２００７年２月６日　火曜日　午後１時２１分