Panasonic DMW-MCTZ3 User Manual
20
VQT1F25
After Use
After finishing taking pictures, follow the steps below.
1
Submerge the Case in fresh water for about 30 minutes or more
without removing the digital camera to remove any salt crystals etc.
without removing the digital camera to remove any salt crystals etc.
≥
Press all the operation buttons etc. on the Case to wash away any
seawater. If the salt crystals are not removed from the buttons etc., they
will harden and the buttons will become unoperable.
seawater. If the salt crystals are not removed from the buttons etc., they
will harden and the buttons will become unoperable.
≥
Do not wash the Case with fast-running or pressurized water etc. as it may
cause water leakage.
cause water leakage.
2
Wipe the water with a dry cloth that has no salt crystals sticking to it
and then dry the Case completely.
and then dry the Case completely.
≥
Do not dry the Case by exposing it to direct sunlight. This may discolor or
damage the Case or may hasten deterioration of the O-ring.
damage the Case or may hasten deterioration of the O-ring.
3
Open the rear case to remove the digital camera.
DMW-MCTZ3.book 20 ページ ２００７年２月６日 火曜日 午後１時２１分