Panasonic KX-TG1855AL User Manual

Page of 44
Preparation
8
If you are satisfied with the operation of your telephone service after plugging in your 
Permitted Attachment, your installation is completed.
You will be unable to connect this Permitted Attachment if your telephone service 
consists only of a wall phone or an old style telephone which is not connected by 
means of a modern plug and socket. In such cases a new socket will need to be 
installed.
Should the Permitted Attachment not operate when plugged into a socket, it is either 
faulty or unsuitable for operation with your telephone service. It should be returned to 
the store where purchased or to an Authorised Service Centre.
Service difficulties
If at any time a fault occurs on your telephone service carry out the following checks 
before you call for service:
L
Disconnect the Permitted Attachment and try using the service with the normal 
telephone.
L
If the telephone service then operates satisfactorily, the fault is in your Permitted 
Attachment. Leave the Permitted Attachment disconnected and report the fault to 
its supplier or agent to arrange for repair.
L
If when using the telephone the service is still faulty, report the fault to “Service 
Difficulties and Faults” for attention.
You are required to keep this Permitted Attachment in good working order while it is 
connected to your telephone service. Its construction or internal circuit must not be 
modified in any way without permission.
Warning:
This cordless telephone system does not incorporate provision for secrecy of 
conversations. Appropriately tuned radio equipment and other cordless telephone 
systems in close proximity may be used by a third party to monitor and possibly 
interrupt conversations in progress when this system is on radio operation.
TG1855-1857AL(e-e).book  Page 8  Thursday, July 12, 2007  5:31 PM