Panasonic KX-TG243SK User Manual
Problem
Cause/solution
I cannot hear a dial tone.
R The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone
does not operate properly, contact your service provider/
telephone company.
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone
does not operate properly, contact your service provider/
telephone company.
The indicator on the handset flashes
slowly.
slowly.
R New messages have been recorded. Listen to the new
messages (page 32).
R New voice mail messages have been recorded. Listen to the
new voice mail messages (page 36).
The receiver volume is changed to
level 4 (default), even though I set it
to level 5 (maximum level).
level 4 (default), even though I set it
to level 5 (maximum level).
R The receiver volume returns to level 4 after you hang up.
Press MjN or MkN to adjust the volume every time or as
needed.
needed.
Programmable settings
Problem
Cause/solution
The display is in a language I cannot
read.
read.
R Change the display language (page 12).
I cannot register a handset to a base
unit.
unit.
R The maximum number of handsets (6) is already registered
to the base unit. Cancel unused handset registrations from
the base unit (page 27).
the base unit (page 27).
Battery recharge
Problem
Cause/solution
The handset beeps and/or flashes. R Battery charge is low. Fully charge the batteries (page 8).
I fully charged the batteries, but
–
I fully charged the batteries, but
–
still flashes,
–
is displayed, or
– the operating time seems to be
shorter.
R Clean the battery ends (
,
) and the charge contacts
with a dry cloth and charge again.
R It is time to replace the batteries (page 8).
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 27).
Noise is heard, sound cuts in and out. R You are using the base unit or handset in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting
R If you use a DSL/ADSL service, we recommend connecting
a DSL/ADSL filter between the base unit and the telephone
line jack. Contact your DSL/ADSL provider for details.
line jack. Contact your DSL/ADSL provider for details.
42
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG477x(en-en)_1130_ver021.pdf 42
2011/11/30 15:57:56