Panasonic KX-TG2388 User Manual

32

For assistance, please visit http://www.panasonic.com/consumersupport

Intercom calls can be made between the 
handset and the base unit.

Press

 {

HOLD/INTERCOM}

.

L

The base unit will ring for 1 minute.

L

To stop paging, press {OFF}.

When the paged party answers, start 
talking.

L

You can switch to the speaker by 
pressing {s}. To switch back to the 
receiver, press {C}.

To disconnect the intercom, press 
{

OFF}.

Press {LOCATOR/INTERCOM}.

L

The SP-PHONE indicator lights.

L

The handset will ring for 5 minutes.

L

To stop paging, press {SP-PHONE} 
or {LOCATOR/INTERCOM}.

When the paged party answers, talk 
into the MIC.

To disconnect the intercom, press {SP-
PHONE} or {LOCATOR/INTERCOM}.

L

The indicator light goes out.

Using the handset
When a handset is paged, it rings and the 
Ringer/Message Alert indicator flashes 
rapidly.

Press {C}, {s} or {HOLD/
INTERCOM}.

L

You can also answer a call by 
pressing any button except {V}, {^} 
or {OFF}.

To disconnect the intercom, press 
{

OFF}.

Using the base unit
When the base unit is being paged, it rings.

Press {SP-PHONE} or {LOCATOR/
INTERCOM}.

To disconnect the intercom, press {SP-
PHONE} or {LOCATOR/INTERCOM}.

During an intercom call:
L

If you have difficulty hearing while 
using the handset speakerphone and 
base unit speaker, decrease the 
speaker volume by pressing 
VOLUME {<} on the base unit or {V} 
on the handset.

L

If an incoming call is being received, 
you will hear two tones (incoming call 
tone, page 40) and “BC” 
will flash rapidly on the base unit.
To answer the call; 
— if using the handset, press {OFF}, 

then {C} or {s}.

— if using the base unit, press {SP-

PHONE} twice.

TG2388.book  32 ページ  ２００５年７月１４日　木曜日　午後４時５８分