Panasonic KX-TG2388 User Manual

54

For assistance, please visit http://www.panasonic.com/consumersupport

Skipping the greeting message to leave 
a message
You can leave a message just as any 
outside caller can. Call your phone 
number, then press {*} to skip the 
greeting message and record your 
message after the beep.

A remote code must be entered when 
operating the answering system remotely. 
This code prevents unauthorized parties 
from listening to your messages remotely. 
Store any 2-digit number (00–99).

Press {MENU}.

Scroll to “Initial setting” by 
pressing {V} or {^}, then press 
{

Select}. 

Press {Select} at “Set answering”.

Scroll to “Remote code” by pressing 
{V}

 or {^}, then press {Select}.

Enter a 

2-digit remote code (00-99).

Press {Save}, then press {OFF}.

L

To confirm the remote code, repeat 
steps 1 to 4. Press {OFF} when finished.

You can change the maximum message 
recording time.
“1min”, “2min”, or “3min”: Caller 
messages are limited to 1 minute to 3 
minutes.
“Greeting only”: The unit plays the 
greeting message but does not record 
caller messages.

Press {MENU}.

Scroll to “Initial setting” by 
pressing {V} or {^}, then press 
{

Select}. 

Press {Select} at “Set answering”.

Scroll to “Recording time” by 
pressing {V} or {^}, then press 
{

Select}. 

Select the recording time by pressing 
{V}

 or {^}.

L

You can also select the recording 
time by pressing {1}, {2}, {3} or {0} 
(Greeting only).

Press {Save}, then press {OFF}.

You can select the number of times the unit 
rings before the Answering System 
answers a call, from “2” to “7” or “Toll 
saver”*.

Press {MENU}.

Scroll to “Initial setting” by 
pressing {V} or {^}, then press 
{

Select}. 

Press {Select} at “Set answering”.

If you select “Greeting only”, the 
unit will answer calls with the greeting 
message, and then hang up. The unit 
will not record any incoming messages. 
The base unit will display “

” instead 

of the number of messages.

TG2388.book  54 ページ  ２００５年７月１４日　木曜日　午後４時５８分