Panasonic KXTG6671B User Manual
Answering system
The answering system can answer and record
calls for you when you are unavailable to answer
the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 35).
calls for you when you are unavailable to answer
the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 35).
Important:
R Only 1 person can access the answering
R Only 1 person can access the answering
system (listen to messages, record a greeting
message, etc.) at a time.
message, etc.) at a time.
R When callers leave messages, the unit records
Memory capacity (including your
greeting message)
greeting message)
The total recording capacity is about 18 minutes. A
maximum of 64 messages can be recorded.
maximum of 64 messages can be recorded.
Note:
R When message memory becomes full:
R When message memory becomes full:
– “Messages full” is shown on the base
unit and handset display.
– The ANSWER ON/OFF indicator on the base
unit flashes rapidly if the answering system is
turned on.
turned on.
– If you use the pre-recorded greeting
message, the unit automatically switches to
another pre-recorded greeting message
asking callers to call again later.
another pre-recorded greeting message
asking callers to call again later.
– If you recorded your own greeting message,
the same message is still announced to
callers even though their messages are not
recorded.
callers even though their messages are not
recorded.
Turning the answering
system on/off
system on/off
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
answering system.
Handset
1
To turn on:
MMENUN#327
To turn off:
MMENUN#328
MMENUN#327
To turn off:
MMENUN#328
2
MOFFN
Note for base unit and handset:
R When the answering system is turned on, the
R When the answering system is turned on, the
ANSWER ON/OFF indicator on the base unit
lights up.
lights up.
Call screening
Base unit / Handset
While a caller is leaving a message, you can listen
to the call through the unit’s speaker. To adjust the
speaker volume, press MDN or MCN repeatedly.
You can answer the call by lifting the corded
handset form the base unit or pressing M
to the call through the unit’s speaker. To adjust the
speaker volume, press MDN or MCN repeatedly.
You can answer the call by lifting the corded
handset form the base unit or pressing M
N on
the handset.
Call screening can be set for each unit. The
default setting is “On”.
Call screening can be set for each unit. The
default setting is “On”.
1
MMENUN#310
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Base unit: MnN (EXIT)
Handset: MOFFN
Greeting message
When the unit answers a call, a greeting message
is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting message
Handset
1
MMENUN#302
2
MbN: “Yes” a MSELECTN
3
After a beep sounds, hold the handset about
20 cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
20 cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
4
Press MSTOPN to stop recording.
5
MOFFN
For assistance, please visit http://www.panasonic.com/help
31
Answering System