Panasonic KX-TVP200 User Manual
4.4 COMMON DPT INTEGRATION FEATURES AND SETUP PROCEDURES
100
Installation Manual
4.4.9
TWR (Two-Way Recording) Button Assignment via
Station Programming
Station Programming
For the Two-Way Recording feature to work at an extension, the extension must have a TWR
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWR button on an extension. (This is a station level programme and should
be done at each individual telephone.)
PC programming is also possible.
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWR button on an extension. (This is a station level programme and should
be done at each individual telephone.)
PC programming is also possible.
1.
Enter PITS Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the Flexible button (CO or DSS/BLF) that you want to assign as the TWR button.
3.
Dial [83] or [90].
Screen output: 2Way-Rec:
4.
Dial the Voice Mail extension number.
Screen output: 2Way-Rec: _ _ _
(_ _ _ = The extension number you entered).
(_ _ _ = The extension number you entered).
5.
Press Store.
6.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
4.4.10 TWT (Two-Way Transfer) Button Assignment via
Station Programming
For the Two-Way Transfer feature to work at an extension, the extension must have a TWT
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWT button on an extension. (This is an extension level programme and
should be done at each individual telephone.)
PC programming is also possible.
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWT button on an extension. (This is an extension level programme and
should be done at each individual telephone.)
PC programming is also possible.
1.
Enter PITS Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the desired FLEXIBLE (CO or DSS/BLF) key that you want to assign as the TWT
button.
button.
3.
Dial [84] or [91].
Screen output: 2Way-Trans:
4.
Dial the Voice Mail extension number.
Screen output: 2Way-Trans: _ _ _
(_ _ _ = The extension number you entered).
(_ _ _ = The extension number you entered).
5.
Press STORE.
Conditions:
This button must be a CO or DSS/BLF key to be
programmed as a TWR button. If this key is pressed
when all Voice Mail ports are busy, the user will hear
reorder tone.
programmed as a TWR button. If this key is pressed
when all Voice Mail ports are busy, the user will hear
reorder tone.