Panasonic KX-TVP200 User Manual
4.4 COMMON DPT INTEGRATION FEATURES AND SETUP PROCEDURES
Installation Manual
97
5.
Repeat these steps for each telephone.
4.4.4
Live Call Screening Recording Mode Assignment via
System Programming
System Programming
This programme allows the VPS to continue recording the conversation in the mailbox after the
extension intercepts the call during the Live Call Screening.
PC programming is also possible.
extension intercepts the call during the Live Call Screening.
PC programming is also possible.
1.
Enter [617] or [616] from system programme.
2.
Press the NEXT button (SP-PHONE).
Screen output: Jack No.?
3.
Enter the jack number.
Screen output: # _ _ :Stop Rec
(_ _ = the jack number you entered)
(_ _ = the jack number you entered)
4.
Press the SELECT button (AUTO-ANSWER) until the desired selection is displayed.
5.
Press STORE.
6.
Press the NEXT button (SP-PHONE).
7.
Repeat the steps 4 to 6 until all jacks are programmed.
4.4.5
Live Call Screening Private/Hands-Free Mode
Assignment via Station Programming
Assignment via Station Programming
This programme assigns a VPS response for when a message is being left in a mailbox. It
determines whether an alert tone is sent or whether the recorded message is played through
the built-in speaker of the extension. The default mode is hands-free. (This is station level
programming and should be done at each individual telephone.)
PC programming is also possible.
determines whether an alert tone is sent or whether the recorded message is played through
the built-in speaker of the extension. The default mode is hands-free. (This is station level
programming and should be done at each individual telephone.)
PC programming is also possible.
1.
Enter Station Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Dial the code for the mode you want this telephone to have.
Hands-Free = 11
Private = 12
Private = 12
Screen output: Hands-Free or Private
3.
Press STORE.
4.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
5.
Repeat these steps for each telephone.
A single-line telephone that is connected to the same extension as a proprietary telephone can
also be used to monitor an incoming message. Be sure that Live Call Screening on the
connected proprietary telephone has been activated. This feature is useful when you are using
a cordless telephone. The handset sounds an alert tone to let you know that a message is
being recorded. To intercept the call, hang up and go off-hook.
also be used to monitor an incoming message. Be sure that Live Call Screening on the
connected proprietary telephone has been activated. This feature is useful when you are using
a cordless telephone. The handset sounds an alert tone to let you know that a message is
being recorded. To intercept the call, hang up and go off-hook.
Conditions:
None