Panasonic KX-TG9391 User Manual
Making/Answering Calls
19
For assistance, please visit http://www.panasonic.com/help
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed (page 24).
the phonebook, a pause is also needed (page 24).
Example: If you need to dial the line access
number “9” when making outside calls with a PBX:
number “9” when making outside calls with a PBX:
1
{
9} i {PAUSE}
2
Dial the phone number.
3
Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Base unit: Lift the corded handset.
Handset: {C}
Note:
L
A 3.5 second pause is inserted each time
{
{
PAUSE} is pressed. Repeat as needed to
create longer pauses.
Answering calls
Using the base unit :
When a call is being received, the LINE1 indicator
and/or LINE2 indicator on the base unit flashes
rapidly.
and/or LINE2 indicator on the base unit flashes
rapidly.
1
Lift the corded handset or press {SP-PHONE}
when the unit rings.
when the unit rings.
L
The called line is automatically selected. To
change the line selection mode, see page
17.
change the line selection mode, see page
17.
L
You can also answer the call by pressing
{
{
LINE 1} or {LINE 2}.
2
When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press {SP-PHONE}.
handset on the cradle. When the
speakerphone is used, press {SP-PHONE}.
Adjusting the base unit ringer volume
Press {^} or {V} repeatedly to select the desired
volume while the base unit is ringing for an
incoming call.
Press {^} or {V} repeatedly to select the desired
volume while the base unit is ringing for an
incoming call.
Note:
L
You can also program the base unit ringer
volume beforehand (page 29).
volume beforehand (page 29).
Temporary base unit ringer off
While the base unit is ringing for a call, you can
turn the ringer off temporarily by pressing {~}.
While the base unit is ringing for a call, you can
turn the ringer off temporarily by pressing {~}.
Using the handset Y
When a call is being received, the ringer indicator
and c and/or d flashes rapidly.
and c and/or d flashes rapidly.
1
Lift the handset and press {C} or {s} when
the unit rings.
the unit rings.
L
The called line is automatically selected. To
change the line selection mode, see page
17.
change the line selection mode, see page
17.
L
You can also answer the call by pressing
{
{
LINE 1} or {LINE 2}.
L
You can also answer the call by pressing
any dial key from {0} to {9}, {*}, or {#}.
(Any key answer feature)
any dial key from {0} to {9}, {*}, or {#}.
(Any key answer feature)
2
When you finish talking, press {OFF} or place
the handset on the charger.
the handset on the charger.
Auto talk
You can answer calls simply by lifting the handset
off the charger. You do not need to press {C}. To
turn this feature on, see page 28.
You can answer calls simply by lifting the handset
off the charger. You do not need to press {C}. To
turn this feature on, see page 28.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the desired
volume while the handset is ringing for an
incoming call.
Press {^} or {V} repeatedly to select the desired
volume while the handset is ringing for an
incoming call.
Note:
L
You can also program the handset ringer
volume beforehand (page 29).
volume beforehand (page 29).
Temporary handset ringer off
While the handset is ringing for a call, you can turn
the ringer off temporarily by pressing {OFF}.
the ringer off temporarily by pressing {OFF}.
: Base unit / Y Handset
TG9391.book Page 19 Tuesday, July 8, 2008 8:01 AM