Panasonic KX-TG9391 User Manual

30

For assistance, please visit http://www.panasonic.com/help

*3 This tone lets you know when you receive an outside call while you are on the other line or an intercom 

call. If you select “On”, the tone sounds 2 times.

*4 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, 

including confirmation tones and error tones.

*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (base unit: tone 1 

to 3/handset: tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.

*6 If you select one of the melody ringer tones, the ringer tone will continue to play for several seconds 

even if the caller has already hung up. You may either hear a dial tone or no one on the line when you 
answer the call.

*7 When the ringer volume is turned off, ~ is displayed followed by the selected line number(s) and the 

base unit and/or handset do not ring for outside calls.

*8 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if 

necessary. The setting should stay at “700ms” unless pressing {FLASH} fails to pick up the waiting 
call.

*9 Generally, the line mode setting should not be adjusted. If the LINE1 indicator or LINE2 indicator does 

not light when another phone connected to the same line is in use, you need to change the line mode 
to “A”.

*10This feature allows the unit to automatically adjust the date and time setting when caller information 

is received. To use this feature, set the date and time first.

TG9391.book  Page 30  Tuesday, July 8, 2008  8:01 AM