Panasonic KX-TG9391 User Manual

34

For assistance, please visit http://www.panasonic.com/help

– if an arrow (>) is displayed after the number, 

the whole phone number is not shown. 
Proceed with the operation for your unit.
Base unit:

Press {8} to see the remaining numbers. To 
return to the previous display, press {7}.

Press {>} to see the remaining numbers. To 
return to the previous display, press {<}.

L

In step 3, the unit automatically uses the line you 
set in line selection mode (page 17) to call back. 
When the line selection mode is set to “Auto”, 
the indicated line (c or d) is used for the call. 
If the indicated line is already being used or you 
want to select the other line:

Base unit: Press {LINE 1} or {LINE 2}, then lift 
the corded handset.

Handset: Press {CALL}, then press {LINE 1} 
or {LINE 2}.

You can edit a phone number in the caller list by 
removing its area code and/or the long distance 
code “1”.

Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {#}{2}{1}{3}

{V}

/{^}: Select the desired entry.

Proceed with the operation for your unit.
Base unit: {EDIT}
Handset: {CALL}

Press {EDIT} repeatedly until the phone 
number is shown in the desired format.

Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}

L

If the indicated line is already being used or 
you want to select the other line:
Base unit: Press {LINE 1} or {LINE 2}, 
then lift the corded handset.
Handset: Press {LINE 1} or {LINE 2}.

Once you call back an edited number, the unit 
remembers the Area Code and Format of the 
Edited Number. Next time when someone calls 
from the same Area Code, caller information is 
customized by the unit as follows:
– When the call is being received, the Caller ID 

number is displayed in the same Format as the 
Edited Number.

– After the call is ended, the phone number of the 

caller, when reviewed from the Caller list, is 
displayed in the same Format as the Edited 
Number.

For example, you can use this feature to set the 
unit to ignore the area code of callers in your area 
code, so that you can call these local numbers 
using caller information without dialing the area 
code.
To activate this feature, you must edit an item in 
the caller list, then call that number. After that, 
phone numbers from that caller’s area code are 
edited automatically.
This feature can be turned on or off (page 28).

L

Phone numbers from the 4 most recently edited 
area codes are automatically edited.

L

If you move to another area, you can turn this 
feature off to erase previously edited area 
codes. To use this feature again, turn it on and 
reprogram the area codes you want to edit once 
again.

Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {#}{2}{1}{3}

{V}

/{^}: Select the desired entry.

{

ERASE}

: Base unit / Y Handset

1 Local phone number

2 Area code – Local phone number

3 1 – Area code – Local phone number

: Base unit / Y Handset

TG9391.book  Page 34  Tuesday, July 8, 2008  8:01 AM