Panasonic KX-TG9391 User Manual
Intercom/Locator
43
For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
– between the base unit and handset.
– between handsets.
– between handsets.
Note:
L
When paging unit(s) for an intercom call, the
paged unit(s) beeps for 1 minute.
paged unit(s) beeps for 1 minute.
L
If you receive an outside call while talking on the
intercom, an interrupt tone will be heard (page
28).
intercom, an interrupt tone will be heard (page
28).
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
{
again. If the speakerphone is used, press
{
SP-PHONE} 2 times. You can also answer
the call by pressing {LINE 1} or {LINE 2}
after hanging up the intercom.
after hanging up the intercom.
– To answer the call with the handset, press
{
OFF}, then press {C}.
Making an intercom call
1
{
INTERCOM}
L
Lift the corded handset if needed.
L
When only 1 handset is registered, the base
unit pages the handset automatically.
unit pages the handset automatically.
2
To page a specific handset, enter the handset
number.
To page all handsets, press {0} or wait for a
few seconds.
number.
To page all handsets, press {0} or wait for a
few seconds.
L
To stop paging, press {INTERCOM}.
3
When you finish talking, press {INTERCOM}
or place the corded handset on the cradle.
or place the corded handset on the cradle.
1
{
INTERCOM}
2
To page the base unit, press {0}.
To page another handset, enter its extension
number.
To page another handset, enter its extension
number.
L
To stop paging, press {OFF}.
3
When you finish talking, press {OFF}.
Answering an intercom call
1
Lift the corded handset or press {INTERCOM}
to answer the page.
to answer the page.
2
When you finish talking, place the corded
handset on the cradle or press {INTERCOM}.
handset on the cradle or press {INTERCOM}.
1
Press {C} to answer the page.
2
When you finish talking, press {OFF}.
Note for base unit and handset:
L
The ringer volume for intercom calls follows the
higher volume level of the 2 lines (page 29).
Even when the ringer volume for both lines is set
to off (page 29), the base unit and/or handset
still rings at a low level for intercom calls.
higher volume level of the 2 lines (page 29).
Even when the ringer volume for both lines is set
to off (page 29), the base unit and/or handset
still rings at a low level for intercom calls.
Transferring calls
Outside calls can be transferred between 2 people.
1
During an outside call, press {INTERCOM} to
put the call on hold.
put the call on hold.
L
When only 1 handset is registered, the base
unit pages the handset automatically.
unit pages the handset automatically.
2
To page a specific handset, enter the
extension number.
To page all handsets, press {0} or wait for a
few seconds.
extension number.
To page all handsets, press {0} or wait for a
few seconds.
3
Wait for the paged party to answer.
L
If the paged party does not answer, press
the flashing {LINE 1} or {LINE 2} to return
to the outside call.
the flashing {LINE 1} or {LINE 2} to return
to the outside call.
4
Place the corded handset on the cradle or
press {INTERCOM}.
press {INTERCOM}.
L
The outside call is being routed to the
handset.
handset.
1
During an outside call, press {INTERCOM}
once to put the call on hold.
once to put the call on hold.
: Base unit
Y Handset
: Base unit
Y Handset
: Base unit
Y Handset
TG9391.book Page 43 Tuesday, July 8, 2008 8:01 AM