Panasonic KX-TG8231 User Manual

28

For assistance, please visit http://www.panasonic.com/help

*1 If you program these settings using one of the handsets, you do not need to 

program the same item using another handset.

*2 This feature allows the unit to automatically adjust the date and time setting when 

caller information is received. To use this feature, set the date and time first.

*3 When the ringer volume is turned off, ~ is displayed and the handset does not 

ring for outside calls.
However even when the ringer volume is turned off, the handset rings:
– at the minimum level for alarm and intercom calls
– at the maximum level for paging

*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone 

(tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.

*5 The preset melodies in this product are used with permission of © 2006 

Copyrights Vision Inc.

*6 If you select one of the melody ringer tones, the ringer tone will continue to sound 

for several seconds if the caller hangs up before you answer. You may hear a dial 
tone or no one on the line when you answer a call.

*7 The flash time depends on your telephone exchange or host PBX. Consult your 

PBX supplier if necessary. The setting should stay at “

” unless pressing 

{

FLASH} fails to pick up the call waiting call.

*8 Turn this feature off if you prefer not to hear key tones while you are dialing or 

pressing any keys, including confirmation tones and error tones.

*9 If you subscribe to Caller ID service and want to view the caller’s information after 

lifting up the handset to answer a call, turn off this feature.

An alarm will sound at the set time for 3 minutes in two different alarm modes: Once 
or Daily. Set the date and time beforehand (page 15).

{

MENU} (center of joystick) i K i {SELECT}

{V}

/{^}: “

” i {SELECT}

{V}

/{^}: Select the desired alarm mode. i {SELECT}

  *

<

>

–

<

>

<

>

  +

–

–

TG8231_8232.book  Page 28  Thursday, July 19, 2007  3:22 PM