Panasonic KX-TG8231 User Manual
Multi-unit Operation
38
For assistance, please visit http://www.panasonic.com/help
To establish a conference call:
Press {CONF}.
L
Press {CONF}.
L
To leave the conference, press
{
{
OFF}. The other parties can
continue the conversation.
Answering transferred calls
Press {C} to answer the page.
L
Press {C} to answer the page.
L
After the paging party disconnects,
you can talk to the outside caller.
you can talk to the outside caller.
Transferring a call without speaking
to the other handset user
to the other handset user
1
During an outside call, press
{
{
TRANSFER}. i Press the
desired handset number.
L k
L k
flashes to indicate the outside
call is on hold.
2
{
OFF}
L
The outside call rings at the other
handset.
handset.
Note:
L
L
If the other handset user does not
answer the call within 1 minute, the
call will ring at your handset again.
answer the call within 1 minute, the
call will ring at your handset again.
Registering a handset
to a base unit
to a base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit (for example, w flashes even when
the handset is near the base unit),
register the handset.
pre-registered. If for some reason the
handset is not registered to the base
unit (for example, w flashes even when
the handset is near the base unit),
register the handset.
1
{
MENU} (center of joystick) i *
i
{SELECT}
2
{V}
/{^}: “
Registration
” i
{
SELECT}
3
{V}
/{^}: “
HS registration
” i
{
SELECT}
4
Base unit:
Press and hold {x} (LOCATOR) for
about 5 seconds, until the
registration tone sounds.
L
about 5 seconds, until the
registration tone sounds.
L
If all registered handsets start
ringing, press {x} (LOCATOR) to
stop, then repeat this step.
ringing, press {x} (LOCATOR) to
stop, then repeat this step.
L
After pressing {x} (LOCATOR),
the rest of this procedure must be
completed within 1 minute and 30
seconds.
the rest of this procedure must be
completed within 1 minute and 30
seconds.
5
Handset:
Press {OK}, then wait until a long
beep sounds and w stops flashing.
L
Press {OK}, then wait until a long
beep sounds and w stops flashing.
L
When the handset has been
registered successfully, w will stop
flashing. If the key tone is turned
on (page 28), a confirmation tone
will be heard.
registered successfully, w will stop
flashing. If the key tone is turned
on (page 28), a confirmation tone
will be heard.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored in the
base unit. This will allow the handset to
end its wireless connection with the
system.
registration (or the registration of
another handset) that is stored in the
base unit. This will allow the handset to
end its wireless connection with the
system.
1
{
MENU} (center of joystick) i *
i
{SELECT}
2
{V}
/{^}: “
Registration
” i
{
SELECT}
3
{V}
/{^}: “
Deregistration
” i
{
SELECT}
4
{
3}{3}{5} i {OK}
L
The numbers of all handsets
registered to the base unit are
displayed.
registered to the base unit are
displayed.
5
Select the handset(s) you want to
cancel, by pressing the desired
handset number ({1} – {6}). i
{
cancel, by pressing the desired
handset number ({1} – {6}). i
{
OK}
L
The selected handset number(s)
flashes.
flashes.
TG8231_8232.book Page 38 Thursday, July 19, 2007 3:22 PM