Panasonic KX-TG8231 User Manual

42

For assistance, please visit http://www.panasonic.com/help

If you still have difficulties after following the instructions in this section, disconnect 
the base unit AC adaptor, then reconnect the base unit AC adaptor.
General use

The unit does not work.

L

Make sure the batteries are installed correctly 
and fully charged (page 12).

L

Check the connections (page 11).

L

Unplug the base unit’s AC adaptor to reset the 
unit. Reconnect the adaptor and try again.

L

The handset has not been registered to the 
base unit. Register the handset (page 38).

I cannot hear a dial tone.

L

The base unit AC adaptor or telephone line cord 
is not connected. Check the connections.

L

If you are using a splitter to connect the unit, 
remove the splitter and connect the unit to the 
wall socket directly. If the unit operates properly, 
check the splitter.

L

Disconnect the unit from the telephone line and 
connect a known working telephone. If the 
working telephone operates properly, contact 
our service personnel to have the unit repaired. 
If the working telephone does not operate 
properly, contact your service provider/
telephone company.

I do not know how to erase 
“

” from the 

display.

L

There are unviewed missed calls remaining. 
View them using the following method.

{

MENU} (center of joystick) i x i 

{

SELECT}

Push the joystick down to search from the most 
recent call, or push the joystick up to search 
from the oldest call.

I have changed the display 
language to a language I 
cannot read.

L

Change the display language (page 14).

TG8231_8232.book  Page 42  Thursday, July 19, 2007  3:22 PM