Panasonic KX-TG5776 User Manual
Making/Answering Calls
28
For assistance, please visit http://www.panasonic.com/help
Using the base unit
1
{
SP-PHONE}
2
Speak into the MIC.
3
When you finish talking, press {SP-
PHONE}.
PHONE}.
Adjusting the ringer volume
Press {^} or {V} repeatedly to select the
desired volume when in standby mode.
Press {^} or {V} repeatedly to select the
desired volume when in standby mode.
L
To turn the ringer off, press and hold {V}
until the unit beeps.
until the unit beeps.
L
To stop ringing, press {STOP}.
Setting the ringer tone
There are 3 tones and 3 melodies.
There are 3 tones and 3 melodies.
1
Press {^} or {V}.
2
Within 10 seconds, press {<} or {>}
repeatedly to select the desired tone.
repeatedly to select the desired tone.
L
To stop ringing, press {STOP}.
Note:
L
If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (tone 1 to 3) for the base unit’s
ringer tone. If you select a melody, you
cannot distinguish lines by their ringers.
service (such as IDENTA-RING), select
a tone (tone 1 to 3) for the base unit’s
ringer tone. If you select a melody, you
cannot distinguish lines by their ringers.
L
If you select a melody for the base unit’s
ringer tone, the ringer continues to
sound for several seconds if:
– the caller hangs up before you answer
ringer tone, the ringer continues to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected to the same
line.
line.
Useful features during a
call
call
HOLD button
This feature allows you to put an outside
call on hold.
This feature allows you to put an outside
call on hold.
1
Press {HOLD} during an outside call.
L
To transfer the call to the base unit or
another handset, continue from step
2, “Transferring calls”, page 65.
another handset, continue from step
2, “Transferring calls”, page 65.
2
Press {HOLD} again.
L
To release the hold, press {C}.
L
The base unit user can take the call
by pressing {SP-PHONE}.
by pressing {SP-PHONE}.
L
Another handset user can take the
call by pressing {C}.
call by pressing {C}.
Press {HOLD} during an outside call.
L
To release the hold, press {SP-
PHONE}.
PHONE}.
L
Handset users can take the call by
pressing {C}.
pressing {C}.
Note for handset and base unit:
L
While an outside call is on hold, the IN
USE indicator on the base unit flashes.
USE indicator on the base unit flashes.
L
If another phone is connected to the
same line (page 15), you can also take
the call by lifting its handset.
same line (page 15), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call
is disconnected.
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call
is disconnected.
Handset
Base unit
TG5771_5776_5777.book Page 28 Friday, February 23, 2007 3:52 PM