AT&T 1739 User Manual

1.  To enter feature setup mode, press and hold SETUP until the system announces “Voice is...”

2.  Press SETUP repeatedly to hear each feature.

3.  When you hear the feature you want to modify, press ANNC/SKIP or MEMO/REPEAT to

change the setting.

4.  Press PLAY/STOP to exit feature setup. The new settings will be saved.

When any feature is on, the message window displays  .
When any feature is off, the message window displays  .

LANGUAGE

•  Choose English to have the system announce

voice prompts in English.

Choose Francais to have the system announce
voice prompts in French.

•  During setup, the message window will display

the current language setting (E for English and
F

for French).

RING SELECT

•  Choose the number of times the telephone will

ring before the system answers a call. You can
set it between 2 and 7 rings, toll saver 2/4 or
toll saver 4/6.

•  When set to toll saver 2/4, the system

answers after four rings when there are no

new messages, and after two rings when there
are new messages. Toll saver 4/6 causes the
system to answer after six rings when there
are no new messages and after four rings
when there are new messages.

•  D uring setup, the message window will

display the number of rings (8 for toll saver
2/4, or 9 for toll saver 4/6).

REMOTE 
ACCESS CODE

•  Change the remote access code to any three

digit number between 500 and 999.

•  The remote access code is preset to 500 and

allows you to access many features of this
answering system remotely from a touch tone
telephone.

•  The three digits of the remote access code are

set separately. The system will prompt you to
set the second and third digits after setting the
first digit. See Feature setup, above.