Nortel Networks CalPilot 4.0 User Manual
July 2006
Installing the 201i server in a large Meridian 1 system
201i Server Hardware Installation
63
Installing the SCSI cables for Meridian 1
Introduction
Before you can connect a CD-ROM or tape drive to the 201i server, you
must install the SCSI cables. The SCSI cables route the SCSI connection
away from the 201i server faceplate so that an external SCSI device can
remain permanently connected.
must install the SCSI cables. The SCSI cables route the SCSI connection
away from the 201i server faceplate so that an external SCSI device can
remain permanently connected.
Cables you need
You require the following cables:
NTRH1408 (for connecting the 201i server to the Meridian 1 I/O panel)
.
CAUTION
Risk of equipment damage
You must power off the 201i server before connecting or
disconnecting SCSI cables.
disconnecting SCSI cables.