Shiro SC3126 User Manual
SC3126 User Guide
8
LCD BACKLIGHT FUNCTION
When there’s incoming call or when the handset is pick up, the blue LCD backlight will lit up.
It will be on for about 6 seconds before going off. Without battery, LCD backlight will not lit
up at all
IN USE LED INDICATOR
When the handset is off hook or in handsfree mode, the LED will turn on.
TROUBLESHOOTING GUIDE
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly from the handset to the handset cord jack
at the base. Ensure you have plug in the telephone cable from the telephone to the wall
socket correctly. If the problem persists, please check with your local dealer.
(Q) I could not see the caller’s number on the LCD when there is incoming call.
(A) Ensure that you have subscribed Caller ID service from your local telecom provider.
(Q) There is no LCD Display / Backlight after I have connected the telephone line. I can
call out normally.
(A) Ensure that you have inserted the batteries on the battery compartment. If there is still
no display, change the batteries and ensure it is not empty. If the problem persists, please
check with your local dealer.
(Q) I cannot hear the VIP ringing tone when there is a VIP incoming call.
(A) Ensure that you have inserted the batteries on the battery compartment. If there is still
no VIP ringing tone, change the batteries and ensure it is not empty. If the problem persists,
please check with your local dealer.
DECLARATION OF CONFORMITY
The telephone complies with the essential protective requirements and objectives of:
•
EC R& TTE Directive 1999/5/EC
•
EC Low Voltage Directive 73/23/EEC
•
EC EMC Directive 89/336/EEC
And conforms to the following relevant harmonized standards:
•
EMC: EN55022, EN55024
•
Safety: EN 60950
Created on 28
th
October 2005. SC3126 Caller ID Phone.
Please visit us at
www.shirocorp.com
.