Renesas rl78 User Manual
RL78/G1A
CHAPTER 7 REAL-TIME CLOCK
7.3.9 Week count register (WEEK)
The WEEK register is an 8-bit register that takes a value of 0 to 6 (decimal) and indicates the count value of weekdays.
It counts up in synchronization with the day counter.
When data is written to this register, it is written to a buffer and then to the counter up to two cycles of f
RTC
later. Set a
decimal value of 00 to 06 to this register in BCD code.
<R>
The WEEK register can be set by an 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
Figure 7-10. Format of Week Count Register (WEEK)
Address: FFF95H After reset: 00H R/W
Symbol
7 6 5 4 3 2 1 0
WEEK 0
0
0
0
0 WEEK4
WEEK2
WEEK1
Cautions 1. The value corresponding to the month count register (MONTH) or the day count register
(DAY) is not stored in the week count register (WEEK) automatically. After reset release, set
the week count register as follow.
Day WEEK
Sunday 00H
Monday 01H
Tuesday 02H
Wednesday 03H
Thursday 04H
Friday 05H
Saturday 06H
2. When it reads or writes from/to the register while the counter is in operation (RTCE = 1),
follow the procedures described in 7.4.3 Reading/writing real-time clock.
R01UH0305EJ0200 Rev.2.00
305
Jul 04, 2013