Vertical Communications SCS 8324S User Manual
DSUII Attendant User’s Guide
August, 03
Comdial
59
4. PRESS programmable button or key-
pad button to choose storage location.
5. SELECT line button to dial out on or
press INTERCOM.
—OR—
If your system provides line groups,
dial 1, 2, 3, or 4 for line group 1, 2,
3, or 4, or dial 0 to have the system automatically choose the line
for you.
dial 1, 2, 3, or 4 for line group 1, 2,
3, or 4, or dial 0 to have the system automatically choose the line
for you.
6. DIAL any number up to 16 digits long (include * and # if needed).
7. SELECT SAVE to store number.
8. PRESS next location button AND
8. PRESS next location button AND
STORE next number.
9. REPEAT previous step until all num-
bers are stored, OR PRESS
SPEAKER to end.
SPEAKER to end.
NOTE: You may need a pause between numbers to compensate
for differences in response time between your system and the host
system (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host sys-
tem that needs a hookflash to access a feature, press TAP to store
a hookflash, then continue dialing. Also, you may need to erase
the typed digits appearing in your display to correct them. If you
do, select BKSP once for each digit to be removed.
for differences in response time between your system and the host
system (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host sys-
tem that needs a hookflash to access a feature, press TAP to store
a hookflash, then continue dialing. Also, you may need to erase
the typed digits appearing in your display to correct them. If you
do, select BKSP once for each digit to be removed.
Select Location
PREV
Selecting a Location
SAVE
BKSP
PREV
918049782200
Entering a Number
OR
Speed Dial Numbers
DIAL desired number
for personal speed dial
DIAL and number
for system speed dial
✳
Autodial Numbers
PRESS button of
desired number
to dial directly
Speed Dial and Autodial Programmable Locations