NEC NDA-24311 User Manual

NEAX2400 IPX ISDN Features and Specifications

Page 114

NDA-24311, Issue 1

This feature allows a D

term

 user to call frequently dialed ISDN numbers using fewer digits (abbreviated call codes)

than would normally be required.

1.

Press the SPEED CALLING - SYSTEM (SPEED - SYS) key; receive dial tone. 

2.

Dial the abbreviated call code (maximum of four digits). The LCD displays:

3.

The call is completed.

4.

If the D

term

 set does not have the SPEED CALLING - SYSTEM [S-3] (SPEED-SYS) feature key, dial the

SPEED CALLING - SYSTEM [S-3] access code.

1.

Press a feature key, then a SPEED CALLING - ONE TOUCH key, the LCD displays previously stored
digits.

2.

Dial the SPEED CALLING - SYSTEM [S-3] access code and the abbreviated call code.

3.

Press a feature key. The LCD displays:

4.

To access, press the SPEED CALLING - ONE TOUCH key.

The abbreviated calling code can be stored along with the access code in the SPEED CALLING - ONE
TOUCH [S-26D] key. Add a pause (RECALL key) between access code and calling code.

1.

SPEED CALLING - SYSTEM [S-3] codes programmed into system data are accessible to all stations with
a CLASS OF SERVICE - INDIVIDUAL [C-15] permitting Speed Calling.

2.

Each abbreviated call code can store a maximum of 24 digits, including access codes.

3.

The standard number of Speed Calling numbers stored in the system is 1000.

4.

Speed Calling numbers are programmed via system data from the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].

5.

Stations can be denied access to Speed Calling via CLASS OF SERVICE - INDIVIDUAL [C-15]
assignment in system data. SPEED CALLING - SYSTEM [S-3] can also be allowed or denied on either
a system- or tenant-wide basis.

6.

TOLL DENIAL/TOLL DIVERSION - PRI [T-40] and TOLL RESTRICTION - 3/6-DIGIT - PRI [T-41]
may or may not be applied to Speed Calling, depending on preference.

7.

LEAST COST ROUTING - 3/6-DIGIT - PRI [L-31] can be provided via Speed Calling access.