Auerswald 2500 User Manual
Use of the Telephone and PBX System
Ringer Signal
101
Assign Key:
Use Function via Key:
By pressing the key, the flashing display backlight is switched on, off or over.
By pressing the key, the flashing display backlight is switched on, off or over.
LED Signalling next to the Key:
Some people are susceptible to epileptic seizures or loss of consciousness when exposed to
certain flashing lights or light patterns. If you had symptoms related to epilepsy when
exposed to flashing lights, do not activate this function.
certain flashing lights or light patterns. If you had symptoms related to epilepsy when
exposed to flashing lights, do not activate this function.
By switching the function “ringer signal/light” on and off, the function “ringer signal” is also
switched on/off (see previous chapter).
switched on/off (see previous chapter).
Open the key programming menu for the func-
tion “ringer backlight” (You will find help on
tion “ringer backlight” (You will find help on
and the following).
define keys
function key ...
... level
ringer backlight
function key ...
... level
ringer backlight
The current settings for the key
assignment is shown on the
display.
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
the softkey in front of the corresponding
selection once or several times (You will find
help on
앫
[switching type]: Enables the assignment
with switch on, off or over.
with switch on, off or over.
Press the
softkey to complete the settings.
off
The flashing display light is switched off and the acoustical ringer signal is
switched on.
switched on.
red
The flashing display light is switched on and the acoustical ringer signal is
switched off.
switched off.
Warning
☞
Advice