Exmark 4500-466 User Manual
Specifications
Operator Controls
•
Steering and Motion Control:
Note: Motion control levers are adjustable to
two heights.
two heights.
– Separate levers, on each side of the console,
control speed and direction of travel of the
respective drive wheels.
respective drive wheels.
– Steering is controlled by varying the position
of the levers relative to each other.
– Moving motion control levers outward (in
slots) locks the drive system in neutral.
•
PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.
(to drive belt) which engages mower blades.
•
Parking Brake Lever: Engages parking brake.
•
Parking Brake Release Button: Releases parking
brake.
brake.
•
Deck Height Adjustment Lever: Sets cutting
height to desired position.
height to desired position.
•
Deck Lift Pedal: Foot pedal that lifts deck.
•
Transport Lock:
–
Latching position: Automatically latches at
the transport position.
– Unlatching position: Deck does not latch at
the transport position.
Seat
•
Type: Standard seat with high back, extra
wide foam padded seat cushion with internal
suspension, thick bolstering, armrests, integral
safety switch.
wide foam padded seat cushion with internal
suspension, thick bolstering, armrests, integral
safety switch.
Optional seat accessories for units with standard
seats:
seats:
– Custom ride suspension system to enhance
Standard Seat. Adds approximately 3 inches
(7.6 cm) to seat height.
(7.6 cm) to seat height.
– Deluxe suspension seat with high back, low
profile foam-in-place cushion (dampened,
adjustable spring suspension), armrests, and
integral safety switch. Seat height remains the
same.
adjustable spring suspension), armrests, and
integral safety switch. Seat height remains the
same.
– Seat Isolation System for reduced vibration,
to enhance ride of standard seat, standard seat
with Custom Ride Seat Suspension or Deluxe
Suspension Seat. Adds approximately 1 inch
(2.5 cm) to seat height.
with Custom Ride Seat Suspension or Deluxe
Suspension Seat. Adds approximately 1 inch
(2.5 cm) to seat height.
•
Mounting: Adjustable fore and aft on seat tracks.
•
Armrests:
– Standard seat: foam padded adjustable flip-up
armrests.
– Suspension seat: molded adjustable flip-up
armrests.
•
Seat Safety Switch:
Integrated seat switch. Time delay seat switch
eliminates rough ground cut-outs.
eliminates rough ground cut-outs.
Hydrostatic Ground Drive System
•
Two unitized hydrostatic transmissions:
12cc Parker axial piston pump
240cc Parker geroler motor
•
Hydraulic Oil Type: Exmark Premium Hydro oil.
•
Hydraulic Oil Capacity: 52 oz (1.5 L) per side
•
Hydraulic Filter: P/N 116-0164
•
Speeds:
– 0-10 mph (16.1 km/hr) forward.
– 0-5.5 mph (8.9 km/hr) reverse.
•
Drive wheel release valves allow machine to be
moved when engine is not running.
moved when engine is not running.
Tires & Wheels
Drive
Front Caster
Pneumatic
(Air-Filled)
(Air-Filled)
Semi-Pneumatic
Quantity
2
2
Tread
Turf Master
Smooth
Size (72 Deck)
24 x 12.00-12
13 x 6.50-6
Size (60 Deck)
24 x 12.00-12
13 x 5.00-6
Size (48 & 52
Decks)
Decks)
24 x 9.50-12
13 x 5.00-6
Ply Rating
4
Pressure
13 psi (90 kPa)
Cutting Deck
•
Cutting Width:
– 48 inch Deck: (121.9 cm)
– 52 inch Deck: (132.1 cm)
– 60 inch Deck: (152.4 cm)
– 72 inch Deck: (182.9 cm)
•
Discharge: Side
15