Honeywell 128 User Manual

2

The ent key accepts and processes entered data. Valid actions are performed and the next
option is accessed.

The esc key aborts the current option  to return to the previous option level. Any option
modification made prior to the option being aborted is erased. Successive pressing of the esc
key returns the user to the start display (known as the BANNER).

The esc key also aborts the setting routine if pressed during the exit time.

The # key is used to display additional choices for certain options, e.g. ADVANCE/RETARD
the time in the Time/Date option.

This key is also used as the user duress key (by pressing twice following a valid code entry).

The * key is used to provide additional features for certain options, e.g. printing the event log
or deleting entries.

The green power LED remains lit whenever the keypad is connected to a mains power supply.
A mains power failure is indicated by the LED flashing slowly. The LED flashes rapidly if the
battery voltage falls below the minimum threshold or if  one of the fuses on the control panel
PCB blows.

The banner is the display shown on the keypad, e.g.  Galaxy 504 V4.00 (with the time and
date on the bottom line). This is shown at all times when the system is unset, unless the menu
is being accessed or an alarm or help message is on the display. The banner can be changed
by the engineer. In the set condition the banner is normally blank.

The user code is a unique four, five or six digit PIN (Personal Identification Number). The PIN
identifies the user to the Galaxy Alarm panel and allows operation of the system.