ICOM IC-706MKIIG User Manual

MEMORY AND SCAN OPERATION

■ Frequency transferring

The frequency and operating mode can be transferred
from memory mode to VFO mode.

➀

Select VFO mode with [

(F-3)

V/M] in the M2 dis-

play.

➁

Select a memory channel with [M-CH].

• Select memory mode to confirm the memory channel’s

contents, if desired; then return to VFO mode.

• “}” appears if the selected memory channel is a

blank channel (and does not have contents). In this
case transferring is not possible.

➂

Push [

(F-2)

MÜV] for 2 sec. to transfer the frequen-

cy and operating mode.

• Transferred frequency and operating mode appear in

the display.

• “MÜV” does not appear in memory mode.

MÜV

F-2

SPLIT

Push for

2 sec.

[EXAMPLE]: Transferring contents of memory 16.

Operating frequency:

21.320 MHz/USB (VFO)

Contents of memory 16: 14.020 MHz/CW

VFO A

USB

VFO A

USB

VFO A

M-CH

SHIFT

■ Memory names

All memory channels (including scan edges and the
call channel) can be tagged with alphanumeric names
of up to 9 characters each.

All common keyboard characters (ASCII characters
33 to 126) can be used, including numerals and punc-
tuation marks.

• Calling up memory names
➀

Select the G4 display.

➥ Push [DISPLAY] 1 or 2 times to select G.

➥ Push [MENU] one or more times to select the

G4 display.

➁

Select a memory channel with [M-CH].

• Editing (programming) memory names
➀

Call up the desired memory (channel) name as
above.

➁

Push [

(F-3)

É] to enter memory name edit mode.

• “name edit” appears briefly, then a flashing cursor

appears under the first character position.

➂

Rotate the main dial to select the desired charac-
ter, then advance the cursor position.

• [

(F-3)

Ç] increments the cursor position; [

(F-1)

Å] decre-

ments the cursor position.

• [(F-2)] overwrites the character with a space.

➃

Repeat this procedure until all desired characters
have been selected.

➄

Push [

(MENU)

Ä] to exit memory name edit mode.

• The G4 display reappears and the programmed mem-

ory name is displayed.

G4 memory name

G4 Repeater É

ÄÅÖ

name edit

F-3

MENU

ÄÅR

ÄÅRe

ÄÅRepeaterÖÇ