ICOM IC-706MKIIG User Manual

53

SET MODE

7

26 PWR ON CHK 

When this item is set to “on,” the set output power is
briefly displayed when turning power ON (RIT and
auto power off settings are also displayed if activat-
ed); when turned “oFF,” the display goes directly to
frequency indication at power ON.

Power on check ON
 (default)

Power on check OFF

24 AM NB 

When this item is set to ON, the noise blanker func-
tion is available in AM mode. This is useful when
communicating in AM mode (the noise blanker func-
tion should not be used when listening to regular AM
broadcasts as it may degrade the received audio).

Noise blanker available
(default)

Noise blanker not available

20 AUTO RPTR 

When this item is set to “on 1”, the tone encoder is
not set when the auto repeater is activated; when set
to “on 2” the auto repeater function also sets the tone
encoder on.

Auto repeater function OFF
(default).

Auto repeater function ON,
tone encoder OFF.

22 SCAN SPEED 

This item sets the rate at which channels or frequen-
cies are scanned during scan operations. High or low
can be selected.

23 U/D SPEED 

This item sets the rate at which frequencies are
scanned through when the [UP]/[DN] switches are
pushed and held. High or low can be selected.

Scan speed is set to high
(default).

Scan speed is set to low.

Up/down speed is set to
high (default).

Up/down speed is set to low.

21 SCAN RESUME 

This item sets the scan resume function ON or OFF.

: scan resumes 10 sec. after stopping on a signal

(or 2 sec. after a signal disappears); 

: scan does

not resume after stopping on a signal. For the priori-
ty watch, setting to OFF pauses the watch until sig-
nal disappears and scan resumes.

Scan resume function is
turned ON (default).

Scan resume function is
turned OFF.

25 PAD CH 

This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.

5 memo pads are available
(default).

10 memo pads are available.