Guardian Technologies DVST User Manual
6
Demonstration Mode
This is provided to allow two DVST units to be connected back to back without the need
for connection to MODEMs or Terminal Adapters.
for connection to MODEMs or Terminal Adapters.
A special demonstration cable is used, details of this are explained later in the chapter.
6.1
Demonstration mode
DEMO=
Turn the demonstration mode ON / OFF
Turns the demonstration mode on or off. The demonstration mode is
quit if the power to the DVST is turned off.
quit if the power to the DVST is turned off.
Note: ISDN must be set to Direct Mode
Dedicated Micros Ltd
Page 13
DVST Installation Guide
Demonstration Mode