Guardian Technologies DVST User Manual
13.2
Connecting the DAL100
Microphone ( refer to fig. 7 )
Connect the 3.5mm jack plug of the microphone into socket on end panel. Connect the
microphone press-to-talk lead to pins 1 and 9 of a 15way male connector and plug into
socket on end panel,
microphone press-to-talk lead to pins 1 and 9 of a 15way male connector and plug into
socket on end panel,
Speaker ( refer to fig. 8 )
Connect the 3.5mm jack plug of the speaker to the SPEAKER OUT socket.
Power Supply ( refer to fig. 8 )
Connect the power supply to the socket marked PWR on the end panel.
DVST Connection ( refer to fig. 8 )
Using the 9 way to 9 way cable connect the DAL100 unit to port AUX1 on the DVST.
(Details are in the cable section of this manual)
(Details are in the cable section of this manual)
Set Port Usage ( refer to SETUP para 5.7 )
Port Aux1 on the DFT0150 sould set to the following:
PORT = AUX1 38400 N 8 1 PKT
Page 54 Dedicated Micros Ltd
Audio DVST Installation Guide
Fig: 8 Microphone connection