Jasco 45246 User Manual

7

The receiver system can monitor up to 2 wireless 

cameras. You can operate the receiver in either 

Manual or Auto mode. To view more than one 

camera, locate the camera channel selection 

switch (1  2  1/2) on the rear panel of the  

receiver.

The receiver must be set to the ‘1/2’ position to 

allow two cameras to be monitored. The next step 

will be to set the channel selection switch on both 

cameras. 

Operating the receiver in 

manual mode allows you  

to manually select a single  

camera/channel to monitor  

exclusively. The system will  

remain on the selected  

channel indefinitely until the  

other channel is selected. To select one of the two 

channels (cameras) manually, locate the AUTO 

and MANUAL buttons on the top of the receiver. 

Press and release the MANUAL button. The red LED 

labeled  ‘A — M’ will turn on and the corresponding 

Auto

Manual

Channel 

Selection 

switch