D-Link DSC-6314 User Manual
61
D-Link DCS-6314 User Manual
Section 3: Configuration
Here you can configure the ICR and IR settings. An IR(Infrared) Cut-
Removable(ICR) filter can be disengaged for increased sensitivity in
low light environments.
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
Off:
On:
Sync:
Schedule:
The Day/Night mode is set automatically. Generally,
the camera uses Day mode and switches to Night
mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The
camera will enter Day mode at the starting time
and return to Night mode at the ending time.
The camera can enable or disable the IR (infrared)
light according to your preferences. This setting
provides additional controls depending on your
specific application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or off according to the
schedule that you specify below.
ICR and IR