Crimestopper Security Products TN-4003 User Manual

 

9 

 

 
NOTE: Some Options Need to Be Pre -programmed From Crimestopper prior to 
installing the unit. 
 
Pin 1 Black:  Chassis Ground Input 
THIS WIRE MUST BE CONNECTED TO THE CHASSIS METAL OF THE VEHICLE.  
Scrape away any paint or dirt to ensure a good connection. 
 
Pin 2 Green: Starter Disable (-) (Output #2) Requires Relay 
This wire has a negative output to hook up to optional relay. See wiring diagram for 
connection.  
 
Pin 3 Blue: GEO Fence (Optional) (-) Input #2 
Connect wire to momentary switch 2 sec input to trigger for GEO fence or 15 sec 
input to trigger alarm. 
 
Pin 4: Empty  
 
Pin 5 Red: Battery Back Up Power (Input) 
Pre-wired to connector for battery back up.    
 
Pin 6 White: Overheat Trigger/ Road Side Assistance (-) Input #3     
This wire needs 2 minute trigger for Overheat or 2 sec trigger for Road Side 
Assistance. Pre-programmed for Overheat. 
 
Pin 7: Empty  
 
Pin 8 Brown: Ignition Input #4 (+) 
This wire must be connected to an Ignition source. 
 
Pin 9: Empty  
 
Pin 10 Purple: LED (Optional) (+) Output 
This wire connects to optional LED for visual status of RSA or GEO Fence. 
 
Pin 11 Yellow: Door Unlock Output (-)  
This wire connects to the door unlock circuit. This wire is a negative output and may 
require additional relays to interface with different door lock circuits