Emerson AC4 User Manual

® 

™

This section presents Service Terminal Interface screens for each of the following:

* Setup System Information features are:

• Change Password
• Set Date & Time/Automatic Daylight Saving Time
• Setup Site ID
• Backup and Upload Configuration File (Service Terminal Interface only)
• Factory  Defaults
• Firmware Update (Service Terminal Interface only)

Note that two of these system features—Backup and Upload Configuration File and Firm-

ware Update—are unique to the Service Terminal Interface.

Tips on Using the Service Terminal Interface
Use the following tips when making changes in the Service Terminal Interface:

• Data that can be entered is shown in parentheses ( ) in prompt line.
• The current setting is shown in brackets [ ] in the line below the prompt

• To accept the current setting, press the Enter key.
• To change the current setting, enter the value and then press Enter.

• Pressing Escape will exit the current setup function or take you to the previous menu screen.

SETUP MENU

1=SETUP INPUTS

Configure digital inputs

2=SETUP COMMON ALARM

Set up the common alarm to reset with silence

3=SETUP ZONES

Define areas with 2-4 devices each

4=SETUP OUTPUTS

Configure digital outputs

5=SETUP SYSTEM INFORMATION*

Set up features such as password and date & time*

6=SETUP OPERATION

Set up rotation sequence, standby testing

7=OVERRIDE OUTPUT

Manually override automatic control of outputs

8=CLEAR ALARMS&LOGS

Clear active alarms; clear alarm and event logs

9=RETURN TO MAIN MENU

SELECT A NUMBER: 

>CHANGE LABEL(8 CHARACTERS MAX).
>[DEVICE_1]
>[
>COMMAND SUCCESSFUL

>IS INPUT NORMALLY OPENED(NO) OR NORMALLY CLOSED(NC)?
>[NO]
>[
>COMMAND SUCCESSFUL